A few weeks ago I checked the Enphase Enlighten web portal (see it here on my web site) that shows the real-time performance of my solar power system and noticed that the top-left solar panel was not producing power. The numbers showing Watts per panel are updated every 10 minutes, and you can play back data from previous days/weeks etc.
So I contacted Enphase and they confirmed that the M190 microinverter had failed and authorized an RMA for a warranty replacement. These products are warrantied for 15 years and this is the 2nd one I have replaced so far. (Microinverters convert DC solar power to 240VAC that feeds power into the building). I received the replacement unit a week later and asked my friend John if he could come over and help replace it, John is a retired builder and enjoys climbing around on buildings! We borrowed my other neighbor's ladders and climbed up to the roof.
It was a relatively simple matter to replace. First I turned off the main breaker for the array, then climbed up and covered the panel with cardboard to prevent it from generating power while disconnecting and re-connecting it. We unbolted the panel and moved it over to access the microinverter underneath.
I shot a time-lapse video of the process:
Once it was installed, I had to press a button on the Envoy web interface box so it could "find" the new inverter.
For more information about the process of installing my solar array, click here to see the detailed blog.
No comments:
Post a Comment